Homecasting Horses in 45mm

   A couple of other blogs have been working on post-ACW militia companies, an area of great interest to me. As mentioned before, anyone interested in colorful uniforms would do well to look into the militia uniforms of the militia in the United States in the 19th century. 

    I have been toying with different projects to get my interest back into gaming. One was to use Britain's West Point cadet figures to create post-ACW militia companies. Another was to make 40mm Militia units. I started by making a mold of a Britain's West Point figure; the idea is to use this figure to convert to a master that different heads could be added to.  The mold turned out usable figures; now to figure how to use them.

   I also saw at Berliner Zinnfiguren a nice horse mold in 45mm. The picture shows an elegant horse in full gallop. I ordered it, along with a Napoleonic Chasseur a Cheval figure.  I almost cancelled the order once the postage was added; however I broke down and bought the molds. 

  They came this week. As my wife was going out with a friend Saturday morning, I set up for a casting session while she was gone. I had also made a mold of a Britain's series B Guard marching figure that I wanted to test.

   The casting session was partially successful. My homemade mold was a failure. However, the Horse mold was a success. The horse mold, made by the company Nowikoff, is a two piece figure. What makes this mold great is the body of the horse is hollow, cutting down both weight and the amount of metal used. The mold fills well, however, being a rather thin mold, needs several clamps to keep it together without the metal oozing out. As can be seen from the photos below, the horse as cast is leaping over a bush, with a large base. I ordered it, hoping to cut the base and bush off, thereby having a horse with a classic Britain's free standing horse. Thankfully it worked as I hoped, although the legs have to be bent slightly to get them stable. Luckily the metal being used can be gently bent, so the horse is free standing. The two halves fit together well, with a few gaps that need to be filled.

  While working on the horse, another thing I wanted to see is if Zinn Brigade horsemen would work with this horse. I tried a Lancer figure on the first casting. I was very happy with the result. So happy, in fact that I cast total of 5 horses and a couple more Lancers with the idea of making a unit of Lancers. I want to paint up a unit of National Lancers, a Massachusetts Militia unit formed in the 1800's which became quite famous, and saw action in 3 wars. The National Lancers are still in existence, being a ceremonial unit in my home state.

West Point Casting

First casting of Nowikoff horse mold

Trying the horse with a Zinn Brigade Lancer. The inspiration for the National Lancers

A photo of a just poured horse. I believe more metal goes back into the pot that goes to the horse itself. I cut off the bush and base and return those to the pot.

Working on cleaning up the castings.

The horses have been glued together and primed for painting. I started painting one of the horses to see how glossy the glossy paint I am using was going to be. I really want these figures to look like proper "Toy Soldiers".